Saturday, December 08, 2018

BAH HUMBUG _QOL of patients with multi morbidity is not improved with patient-centered care model

BAH HUMBUGQOL of patients with multimorbidity is not improved with patient-centered care model
Published: 2018-10-10
Clinical Question
Is the patient-centered care model more effective than usual care in improving the quality of life of patients with multiple chronic medial problems?
Bottom line
In this cluster randomized trial, a patient-centered care model was no better than usual care in improving quality of life or measures of illness or treatment burden among patients with multiple chronic medical conditions. (LOE = 2b)
Reference
Salisbury C, Man M-S, Bower P, et al. Management of multimorbidity using a patient-centred care model: a pragmatic cluster-randomised trial of the 3D approach. Lancet 2018;392(10141):41-50. 

Fox guarding the chicken coop? Proposed changes to diagnosis criteria labels millions more as hypertensive

Proposed changes to diagnosis criteria labels millions more as hypertensive
Published: 2018-10-09
Clinical Question
What is the effect of changing the definition of hypertension?
Bottom line
To paraphrase the Bard: Is a diagnosis by any other criteria still the same diagnosis? This study found that recent guidelines (2017) from the American College of Cardiology (ACC) and the American Heart Association (AHA), which have not been endorsed by other groups, would immediately classify more than 70 million Americans and more than 266 million Chinese as having hypertension, many of them eligible for treatment. Translated, in the range of 45 to 75 years of age, 63% of the United States population and 55% of China's population would be classified as having a risk factor for cardiovascular disease (no analysis, yet, of other countries). Although a boon for the pharmaceutical and life insurance industries, these numbers could overwhelm national health systems and provide little benefit to their populations 

CHOOSE YOUR IMAGE SIZE AND FILE FORMAT

6. CHOOSE YOUR IMAGE SIZE AND FILE FORMAT

image
ONCE YOU’RE DONE working with your images, you’re going to want to save these files in a format that either lets you make changes later or that you can share with other people, be it in print or on the web.
There are two general file formats that you will be working with most of the time. The Photoshop (PSD) file format retains all of the work that you have done to the file in Photoshop. This is largely considered to be a layered file format (we’ll talk about layers a little bit later). Use this format to save any kind of work that you may want to revisit later.
The second format that you will largely work with is the JPG format. This is the format used for printing images and sharing them online. The file is generally smaller than a PSD file because there is a certain amount of compression applied to make the transmission of the file easier. The level of compression is largely dependent on what you specify.
When you select the JPG format from the File > Save As dialog box and click Save, you’ll be presented with a JPG Options dialog box (Figure 6.1). This is where you can designate the quality at which you want to save the file. A higher Quality number means less compression is applied to the file. A lower Quality number means more compression is applied to the file. While you won’t necessarily see the difference until you really zoom into the file, there is a drastic difference in file size (Figure 6.2).
image
Figure 6.1 The JPG Options dialog box asks you to specify the quality at which you want to save your file. If you select a higher quality, less compression will be applied to the file.
It’s often a good idea to select a lower quality (higher compression) when you want to share an image online or send it via email, but if you want to retain as much detail as possible, it’s better to choose a higher quality (less compression).
It’s also important to know how to resize an image while you’re working with it. For an image you want to share on the Internet, you generally do not need a resolution higher than 72 pixels per inch. With the file open, select Image > Image Size, and then adjust the Resolution right in the Image Size dialog box (Figure 6.3). I recommend you change the resolution before you change the width and the height of the document you want to resize.
If I want to share a photograph online—on Facebook or Instagram, for example—I generally set the longest side to no more than 1600 pixels and choose a resolution of 72 pixels per inch. I usually save the document with a Quality of about 8. That gives me a good balance between quality and a small enough file size to share online.
image
Figure 6.2 Lower quality means more compression and much smaller files. I chose a Quality of 0 for the file on the left, which resulted in a file size of 599 KB. The file on the right was saved at a Quality of 10 and is 9.1 MB.
image
Figure 6.3 For images you plan to share online, a resolution of 72 pixels per inch works well.

Set the Preferences for the Way You Work


Entire Site
URL
 

#2 1.2. Set the Preferences for the Way You Work



#2 1.2. Set the Preferences for the Way You Work

In addition to Color Settings, Photoshop includes ten different panes in the Preferences dialog box. Although you can work with the default settings, changing some of these can make your computer run more efficiently, and changing others can make it easier to work with your projects. For example, by default, Photoshop is set to use more than half of the available RAM. You can lower this default setting depending on how much RAM you have installed in the computer and how many other applications you keep open at the same time. You can change the default colors for the guides and grid when they are too similar to those in your image. Setting an additional plug-ins folder keeps third-party items separate from included Photoshop plug-ins, and setting a separate scratch disk can speed up your work on large files. Other personalized options, such as asking Photoshop to automatically launch the Bridge, can help you use Photoshop the way you want.
Read through each Preferences pane to familiarize yourself with the choices. Select the settings to fit your workflow and make Photoshop work for you.


   
You are viewing the content on this page in Preview Mode.   

   
Related Content
HIDE

5. USE KEYBOARD SHORTCUTS TO ZOOM IN AND OUT

image
THERE ARE A couple of things that I think you absolutely need to know how to do when you’re learning Photoshop, and zooming in and out of a document is one of them. Sure, it sounds pretty straightforward: zoom in, zoom out, next lesson. However, this is one of those instances in which a lot of people don’t spend enough time looking at the proper technique or learning how to efficiently move around a document. When you don’t use the proper technique, a job that would normally take you five minutes can turn into a 35-minute ordeal.
Think about it; zooming in and out is the cornerstone of everything you do in Photoshop. If you’re retouching eyes, you need to get right into the eyeball. If you’re trying to clone out a tree from a background, you need to get into the individual components of the tree. If you need to retouch skin, you’re going to have to zoom in to a pore level. All of these things will require you to zoom in to a portion of the document, and then move further away from it.
The technique I’m going to share is incredibly simple, but you need to do it right the first time and you need to exercise really good habits right from the very start. If you take an hour to practice this technique, and then go in and do it for five minutes at the start of a project, you’ll be surprised by how fast you can assimilate this information into muscle memory.
Before we start any of this, it’s important for you to have proper Photoshop keyboard technique. Think about the keyboard that’s in front of you. If I were to make a guess, I’d say your keyboard is directly in front of you, and the space bar is lined up with your belly button. You position your keyboard this way because it’s the most comfortable position for typing. Half of the keyboard is covered by your left hand and half by your right hand, making it easier for you to access all of the buttons. This is how we learned to type.
However, in Photoshop you don’t use the keyboard for typing. The keyboard is really just an extension of tools and shortcuts—a physical representation of your toolbar, if you will—so you don’t need to have it directly in front of you. In fact, it works to a disadvantage if you do. I recommend moving it all the way over to one side, opposite your mouse. When it is over on one side, you can cover the span of the keyboard with one hand, and operate your mouse with your other hand. If you need to press Command+C (PC: Control+C), for example, you can use your ring finger and middle finger. To press Command+P (PC: Control+P), you can press the Command key (PC: Control) on the right side of the keyboard with your thumb and the letter P with your index finger. Moving around like this is a lot more comfortable and you will be more likely to remember keyboard shortcuts and commit them to muscle memory.
Now that your keyboard is set up, let’s talk about zooming in. Press Z on your keyboard to trigger the Zoom tool at the bottom of the toolbar. Once the Zoom tool is selected, click and drag to the right to zoom in to your document. Click and drag to the left to zoom back out. Once you are zoomed in to a portion of the document, you’re going to want to move around in the document. Select the Hand tool by pressing H on your keyboard, and then you can click and drag on the document window to move it around. So this is pretty straightforward—use the Z and H keys to toggle between the Zoom and Hand tools.
The problem with this method, though, is that more often than not, you don’t want to be constantly switching back and forth between these tools. You could be in the middle of brushing in a sky or retouching some pores and you don’t want to switch from the brush, to the zoom, to the hand, and keep clicking on keyboard shortcuts. Let’s look at another keyboard shortcut for zooming in and out and moving around.
Press the V on your keyboard to select the Move tool. Now hold down the Command key (PC: Control) and the space bar, and you’ll notice that the cursor turns into a Zoom tool and you can click and drag to zoom in and out. Once you zoom into a specific area, release the Command key (PC: Control) and space bar, and you’ll be brought right back to the Move tool. If you want to move around in the document, you can hold down the space bar to access the Hand tool. Continue holding down the space bar and add in the Command key (PC: Control) to access the Zoom tool again.
Practicing this keyboard shortcut is supremely important—hold down the space bar and Command key (PC: Control), zoom in, zoom out, release the Command key (PC: Control) to switch to the Hand tool temporarily, move to another portion of the document, and so on. Yes, I know, it feels very basic, but because you will be doing this over and over again when you’re working on your projects, knowing these basics is very helpful.
When you’re working with the Zoom tool, keep in mind that it is relative. That is to say, when you select the Zoom tool and click-and-drag on a portion of a document, you will Zoom in on that general area. For example, in my picture of New York City, if I hold down the Command key (PC: Control) and space bar and click-and-drag on the Empire State Building, it brings me right into the Empire State Building area (Figure 5.1). If I zoom in to the blue reflection on the water, it brings me into that portion of the picture (Figure 5.2).
You have to be very particular about where in the document you’re zooming in and out. If you want to see the entire document in the workspace, you can select View > Fit on Screen, or use the keyboard shortcut Command+0 (PC: Control+0). If you want to see the document at 100%, press Command+1 (PC: Control+1). This will get you to the print size, or 100% of the Photoshop document. These are absolutely essential keyboard shortcuts for you to practice using, and the more you do, the faster and easier your work in Photoshop will be. Sounds simple, but it’s worth it.
image
Figure 5.1 Zooming in on the Empire State Building.
image
Figure 5.2 Zooming in on the reflection on the water.

Photoshop_ Select the Color Settings for Your Projects

#1 1.1. Select the Color Settings for Your Projects

#1 1.1. Select the Color Settings for Your Projects

Using Adobe Photoshop CS3 is an image-altering experience! You can work on images for print or for the Web. You can improve photographs, repurpose them, or create original designs. Because printed images and Web images have different limits on the range of colors that they can represent, you need to set the working color space for your project.
Photoshop's default color space is set to sRGB, a very limited color space intended to be viewable on even the lowest-quality monitor. sRGB is a good color space for preparing Web images; however, it is a much smaller color space than what better monitors can show and what printers can actually produce. Photographers and designers generally prefer the larger color space called Adobe RGB (1998), a good color space for working with photographs and projects that you plan to print.
In Photoshop CS3, you can easily choose your color space and save it as your own setting. Using the North America Prepress 2 settings and Adobe RGB (1998) will make your printed colors look much better.
 Click Edit.
 Click Color Settings.


The Color Settings dialog box appears.
 Click here and select North America Prepress 2.
 The RGB setting changes to Adobe RGB (1998).
The rest of the Color Settings dialog box changes to reflect the preferred working space for images that you print.
 Click More Options.


The dialog box expands.
 Click here and select Perceptual for photography or Relative Colorimetric for a graphic design project.
 Click OK.
Your color settings are saved until you reset your preferences.
Customize It!
You can save your own Color Settings preset. The name of the preset changes to Custom when you deselect any check box or make any other changes. Click Save after customizing your settings. Type a name in the Save dialog box and click Save. Your customized preset appears in the Settings drop-down list, ready for you to choose.
Try This!
You can synchronize the color settings in other Creative Suite applications to match your saved custom Photoshop color settings. In Photoshop, click File and select Browse to launch the Bridge. Click Bridge and select Preferences (Mac) or Edit and select Preferences (PC). Click Advanced and click Enable Color Management In Bridge. Then from the Bridge, click Edit and select Creative Suite Color Settings. Click your saved custom color settings and click Apply.

Adobe® Photoshop® CS3: Top 100 Simplified® Tips & Tricks


Adobe® Photoshop® CS3: Top 100 Simplified® Tips & Tricks
By: Lynette Kent

Publisher: Visual

Pub. Date: September 11, 2007

Print ISBN: 978-0-470-14476-3

Web ISBN: 0-470144-76-9

Pages in Print Edition: 256


Copyright

Praise For Visual Books

Credits

About the Author

How To Use This Book

Chapter 1. Customizing Photoshop for Your Projects
#1 1.1. Select the Color Settings for Your Projects

#2 1.2. Set the Preferences for the Way You Work

#3 1.3. Customize your Personal Workspace

#4 1.4. Personalize Your View of the Bridge

#5 1.5. Add Your Own Keyboard Shortcut for a Favorite Filter

#6 1.6. Create a Custom Action to Increase Your Efficiency

#7 1.7. Design a Customized Brush With Your Settings

#8 1.8. Make a Special Gradient to Suit your Design

#9 1.9. Calibrate and Profile Your Monitor for Better Editing

#10 1.10. Turn on the Full Power of Photoshop with a Pen Tablet

Chapter 2. Working with Layers, Selections, and Masks
#11 2.1. Duplicate and Change the Background Layer to Fix Problems Such as Overexposure

#12 2.2. Using an Adjustment Layer to Adjust a Photo Nondestructively

#13 2.3. Blend Two Photos Together with a Layer Mask

#14 2.4. Using Custom Shape Layers to Add Designs to Photos

#15 2.5. Accentuate a Sky Easily with a Gradient Fill Layer

#16 2.6. Using the Quick Selection Tool and Refine Edge Palette for Selections

#17 2.7. Using a Quick Mask to Make a Detailed Selection

#18 2.8. Extract the Main Subject from the Background

#19 2.9. Open or Add layers as Smart Objects for Nondestructive Changes

#20 2.10. Apply Filters as Smart Filters for Dynamic Adjustments

Chapter 3. Straightening, Cropping, and Resizing
#21 3.1. Crop Your Images and Use a Rule-of-Thirds Grid to Improve Composition

#22 3.2. Create a Level Horizon

#23 3.3. Try a Reverse Crop to Expand the Canvas

#24 3.4. Crop and Straighten in Camera Raw

#25 3.5. Straighten Crooked Scans Quickly

#26 3.6. Crop Multiple Images from One Original to Create a Triptych

#27 3.7. Change Your Perspective with the Crop Tool

#28 3.8. Straighten Buildings with the Lens Correction Filter

#29 3.9. Create a Panorama from Multiple Photos

#30 3.10. Maximize Your Image Size with Minimal Visible Loss

Chapter 4. Retouching Portraits
#31 4.1. Remove Blemishes and Improve the Skin

#31 4.2. Remove Blemishes and Improve the Skin

#32 4.3. Remove Red Eye to Quickly Improve Any Photo

#33 4.4. Change Eye Color Digitally

#34 4.5. Reduce Wrinkles with a Soft Touch

#35 4.6. Whiten Teeth to Improve a Smile

#36 4.7. Brighten the Eyes by Lightening the Whites

#37 4.8. Add Depth to Eyes to Emphasize Them

#37 4.9. Add Depth to Eyes to Emphasize Them

#38 4.10. Add a Catch Light to Make the Eyes Come Alive

#39 4.11. Sharpen Just the Eyes to Add Focus

#40 4.12. Add a Soft-Focus Effect to Make a Portrait Glow

Chapter 5. Changing and Enhancing Colors and Tone
#41 5.1. Improve an Underexposed Photo in Two Steps

#42 5.2. Improve an Overexposed Photo in Three Steps

#43 5.3. Remove a Colorcast to Improve the Overall Color

#44 5.4. Colorize an Old Black-and-White Photograph

#45 5.5. Make a Quick Change to Grayscale

#46 5.6. Give a New Photo an Old Colorized Look

#47 5.7. Using Camera Raw to Recover Highlights

#48 5.8. Improve a Sky with HSL Values in Camera Raw

#49 5.9. Go from Color to Grayscale with the New Black & White Adjustment

#50 5.10. Create a Split Tone for a Special Effect in Camera Raw

Chapter 6. Making Magic with Digital Special Effects
#51 6.1. Apply a Smart Digital Photo Filter for Dynamic Adjustments

#52 6.2. Add a Quick Dark Vignette Effect to Direct the Focus on the Subject

#53 6.3. Add Action with a Simulated Motion Blur

#54 6.4. Using the New Blend Mode to Stylize an Image

#55 6.5. Align and Blend Separate Photos for the Best Group Shot

#56 6.6. Merge Multiple Raw Photos to 32-Bit HDR

#57 6.7. Apply a Split-Neutral Density Filter Using Smart Objects

#58 6.8. Adjust Depth of Field with a Lens Blur Filter

#58 6.9. Adjust Depth of Field with a Lens Blur Filter

#59 6.10. Create a Silhouette for a Custom Design

#59 6.11. Create a Silhouette for a Custom Design

#60 6.12. Become a Digital Architect with the Vanishing Point Filter

Chapter 7. Designing with Text Effects
#61 7.1. Add a Double-Neon Glow to Text for a Unique Design

#62 7.2. Create a Custom Watermark to Protect Your Images

#63 7.3. Fill Any Shape with Text to Create Unique Effects

#64 7.4. Warp Type to Emphasize the Words

#65 7.5. Add Perspective to Type and Keep It Sharp

#66 7.6. Make Your Text Follow Any Path

#67 7.7. Create Eye-Catching Photo-Filled Titles

#68 7.8. Blend Text into a Photograph Creatively

#69 7.9. Create an Amazing Colored Shadow

#70 7.10. Weave Text and Graphics for Intriguing Designs

Chapter 8. Creating Digital Artwork from Photographs
#71 8.1. Give Any Photo a Sketched Look

#72 8.2. Add Your Own Signature to Any Artwork

#73 8.3. Create a Digital Pen-and-Ink Drawing

#74 8.4. Give a Photograph a Woodcut Look

#75 8.5. Turn a Photo into a Colored-Pencil Illustration

#76 8.6. Posterize a Photo for a Warhol-Style Image

#76 8.7. Posterize a Photo for a Warhol-Style Image

#77 8.8. Create a Pen-and-Colored-Wash Drawing from a Photograph

#77 8.9. Create a Pen-and-Colored-Wash Drawing from a Photograph

#78 8.10. Compose a Photo Collage

#79 8.11. Turn a Photo into a Hand-Painted Oil Painting

#79 8.12. Turn a Photo into a Hand-Painted Oil Painting

#80 8.13. Paint a Digital Watercolor

#80 8.14. Paint a Digital Watercolor

Chapter 9. Giving Your Images a Professional Presentation
#81 9.1. Add Traditional Photo Corners

#82 9.2. Make a Frame from a Photograph

#83 9.3. Make a Contact Sheet of Your Photos

#84 9.4. Create a PDF Slideshow Presentation

#85 9.5. Create a Web Photo Gallery with Your Copyright

#86 9.6. Give a Photo an Artistic Edge

#87 9.7. Create a Custom Slide Template

#88 9.8. Create Your Own Custom Edge

#89 9.9. Make One Photo Look Like Many Combined Snapshots

#90 9.10. Make a Photo Look Like a Gallery Print

#90 9.11. Make a Photo Look Like a Gallery Print

Chapter 10. Plugging into Photoshop CS3
#91 10.1. Embellish a Photo Effortlessly with Graphic Authority Frames and Photo Ornaments

#92 10.2. Make a Digital Engraving with Andromeda's Screens Filter

#93 10.3. Enlarge Images with Maximum Quality with Alien Skin BlowUp

#94 10.4. Change Your Photo into Art with Alien Skin Snap Art

#95 10.5. Colorize a Black-and-White Photo with AKVIS Coloriage

#96 10.6. Easily Select the Subject and Remove the Background with Vertus Fluid Mask

#97 10.7. Control Digital Noise with Nik Dfine 2

#98 10.8. Sharpen Photos with Finesse Using Nik Sharpener Pro 2

#99 10.9. Apply Traditional Photo Filters Such As the Sunshine Filter Using Nik Color Efex

#100 10.10. Travel Beyond the Bridge with Extensis Portfolio 8

#100 10.11. Travel Beyond the Bridge with Extensis Portfolio 8

Index

photoshop settings


URL
 

PHOTOSHOP PREFERENCES




PHOTOSHOP PREFERENCES

Before you start working on your images in Photoshop, you need to configure the behind-the-scenes settings that control how different aspects of the program behave. I like to think of this routine as being similar to picking up a rental car at the airport. There are always a few things—positioning the mirrors, adjusting the seat, finding the headlight switch, checking the gas level, and choosing a decent radio station—that I like to do before I drive out of the parking lot and hit the open road.
Photoshop provides numerous ways for individual users to customize the program. From actions that record commonly performed tasks, to user-defined keyboard shortcuts and saved workspaces, there are different avenues to getting the program set up just the way you like it. The place you should start, however, is with the Preferences settings. On Mac OS X, Preferences are located in the Photoshop menu; on Windows systems, they can be found under the Edit menu. There are a lot of preferences, and many of them are specific to tasks and workflows that are more for graphic design and Web-related fields. So I won't discuss each one in minute detail. Instead, I'll address the most important preferences that pertain to the overall operation of the program in general, and more specifically, to those items that have the most impact on the type of work that digital artists and photographers are likely to do. The following text on preferences and color settings is excerpted with permission from my book, Real World Digital Photography.

General Preferences


The following list briefly introduces the general preferences that will help you work efficiently.
  • Image Interpolation. Interpolation refers to the method by which new pixels are created or existing pixels are thrown away when an image is sized. Choosing an interpolation method here will affect how interpolation is done in other areas of the program, such as when you scale an image or transform an image element. The change is immediate and does not require a restart of the program. If you are using Photoshop 7 or earlier, you should choose the Bicubic method because that is the most accurate algorithm for photographic images.
    Photoshop CS has introduced two new interpolation methods: Bicubic Smoother and Bicubic Sharper. For upsampling images (which means making them larger), Bicubic Smoother is almost always the better choice. Bicubic Sharper will often provide the best results for downsampling (or for making an image smaller), although the results can vary from image to image, so the choice is not as clear as Bicubic Smoother is for upsampling. All of the interpolation options are available in the Image Size dialog box (see figure 1.18) and can be chosen for specific images as the need arises. If you choose to scale an image larger or smaller using the Free Transform tool, there is no way to specify an interpolation method. The preference setting is the default, which is why I leave it at Bicubic and adjust the Image Size setting as needed.
    Figure 1.18. The image interpolation algorithms are available in the main Photoshop CS Preferences and the Image Size dialog box.
  • History States. At the most basic level, the History feature in Photoshop is a super undo command that lets you move backward through the editing steps and undo changes. Photoshop refers to every separate change as a history state, which can be anything from a tonal correction, to a paintbrush stroke, to resizing the image. As you might imagine, this provides great flexibility and insulation from “no way out” mistakes that occur during the editing process. The default number is 20, and the maximum number of history states is a whopping 1,000. Whether you'll actually be able to get by with the maximum amount will depend on a number of factors, including the size of your image, how much RAM you have, and how much free disk space is available for Photoshop to use as a Scratch Disk. Until you get a better idea of how many history states is a good number for you, I suggest beginning with 50.
  • Export ClipboardThis setting lets you copy pixels from Photoshop and paste them into another application. Keep in mind, however, that this process can put a large chunk of pixels on the clipboard (the computer's copy buffer) and create a brief lag when you switch to another program. Unless you specifically need to do this, I recommend you leave this preference unchecked. In many cases, what you have copied is too large for the clipboard, and you will see a “clipboard export failed because it is too large to export” warning, which only serves to slow you down as you move between programs. Unchecking this feature still lets you copy and paste within Photoshop itself.
  • History Log. New to Photoshop CS, this preference lets you save a record of what you've done to an image. You can choose to save this information to a file's metadata, to a separate text file, or both. The details can be restricted to the following: Sessions Only, which simply records when you open and close a file; Concise, which tracks session info and keeps a record of every step you perform, similar to the record you see in the History palette; and Detailed, which tracks session info similar to the way the Actions palette does it, keeping a surprisingly detailed record of everything you do to an image, including filter and color correction settings. If you want to remember what you have done to an image, the Detailed option can be very useful.

File Handling

The second preference screen controls how Photo shop manages file saving and compatibility issues.
  • Image Previews. If you want Photoshop to save small versions of the image to be used as icons or preview thumbnails by your computer's operating system, the Image Preview setting is the place to go. Note that this preference has nothing to do with the thumbnail previews generated by the File Browser. If you're generating images for the Web, you usually won't want to save either previews or icons because no one visiting a Web page will see them, so they needlessly increase the file size. If you want to choose on a per-image basis whether these items are generated, select the Ask When Saving option.
  • Ignore EXIF sRGB tag. Color tags are used to give meaning to the color numbers in a digital image so that the appearance of an image will be consistent on different color-managed computers. Some digital cameras will automatically tag their images with an sRGB color profile, even if you have specifically chosen Adobe RGB in the camera's setup menu. While the sRGB profile may represent a correct interpretation for the images a camera produces, it is just as likely to be no more than a “default” tag provided by the camera that does not necessarily reflect the best way to interpret the colors in an image. If you determine that another color profile, such as Adobe RGB or ColorMatch RGB, works well with the images from your camera, you can use this preference to have Photoshop ignore the sRGB tag contained in a camera's EXIF data. If you are using Photoshop 7, you can add this functionality to the program by downloading a special Ignore sRGB Profile plug-in from the Adobe Web site (www.adobe.com/products/photoshop).
  • Ask Before Saving Layered TIFF Files. In the old days, only Photoshop's native PSD format could save layers. Now the club is not so exclusive, and the TIFF specification has the ability to support layers, too. This is really only an issue if you're using TIFF files in page layout programs. In the past, some layout applications would get downright cranky if they encountered a layered TIFF. Photo graphers and production artists would also use the TIFF format for the flattened images that were placed in the layout program and reserve the PSD format for the work-in-progress layered image. The different file formats were another way to keep it clear that the correct, nonlayered file was placed in the page layout. Although programs like InDesign can handle layered TIFFs and PSDs, many designers and prepress businesses still use flattened TIFF files to minimize workflow confusion. If you want a reminder that you're saving a layered file in TIFF format, turn this option on. I leave it off.
  • Enable Large Document Format (.psb). New to Photoshop CS, this preference lets you save very large files (300,000 × 300,000 pixels), which was not possible in earlier versions. The previous 30,000 pixel limit is still the largest size that can be saved using the standard PSD format, but larger files can now be saved as TIFF (up to 4GB) or the new PSB format. This new format and the new image size limits are not backward compatible with earlier versions of Photoshop. The number of people who have a need for such gargantuan files is very small, and I recommend that you leave this preference unselected, simply to protect against accidentally creating a file this big. If you feel compelled to stitch together 97 6-megapixel photos into a single, monumental image, however, this is the preference you need to set to make that possible.
  • Maximize PSD File Compatibility. This option has been around in several versions of Photoshop under a variety of names, and it controls whether Photoshop will include a hidden, composite layer along with the regular layers when you save a file. The composite layer is essentially just a single layer that represents what the image would look like with all the visible layers flattened. This preference is primarily for people who need to use their layered PSD files in other applications, which claim to read PSD files but need that composite layer in order to do so. The main problem with this option is that the extra composite layer will make your file size much larger—up to 33 percent larger—than it needs to be. Although this is not much of an issue with small files, it can quickly become a big issue with larger documents. If you're working on your images only in Photoshop, I recommend you leave this preference turned off and save some disk space.

Display and Cursors

The third preference panel controls how Photo shop displays image channels and tool cursors.
  • Color Channels in Color. I feel strongly that this preference should be left unchecked. When turned on, it displays the individual color channels with bright-colored overlays to match their names. The channels have names that identify them, and the colored overlays actually make it much harder to evaluate the tonal detail in the channels. You're better off leaving this unchecked and viewing the default grayscale versions of the color channels (figure 1.19). In addition, we'll often use the image channels as a foundation to create an alpha channel, as discussed in Part Three of the book, “Selecting and Preserving Fine Detail.” Being able to inspect the image channels is always the first step in building a good alpha channel.
    Figure 1.19. Leave the display of the color channels set to the default grayscale view. The RGB colored overlay makes it hard to evaluate the tonal detail.
  • Painting Cursors. This is probably the most important setting on this panel. When you set the painting cursors to Brush Size, you can see a circular cursor that represents the actual size of the brush you're using. If the cursor is the default brush symbol icon, you won't know how large your brush is until after you've painted on the image. The Other Cursors preference lets you choose between standard, which is the tool icon, and a precise crosshair.

Tip
You can always access a precise crosshair cursor by pressing the Caps Lock key. To return to your regular cursor, simply press Caps Lock again.


Transparency and Gamut


The fourth preference screen controls how Photoshop displays areas on layers without information and gamut warning color.
  • Transparency Settings: Grid Size & Colors. When you have an image element on a separate layer, it can either fill the entire size of the image or occupy only a portion of the image area. If the pixels on the layer do not fill up the full image area, Photoshop uses a checkerboard pattern to represent the transparent pixels that surround it. You'll only see the pattern if you turn off the eye icons in the Layers palette of any underlying layers. If you're new to Photoshop or Photoshop Elements, the checkerboard pattern may be confusing at first. Essentially, the program needs to have something there so that you can see there is nothing there. I have found that the default colors and grid size work fine for most images. Clicking in the colored swatches will take you to the Photoshop Color Picker where you can choose new colors for the grid.
  • Gamut Warning. When the Gamut Warning is activated (from the View menu, choose Gamut Warning), Photoshop will place an overlay tone over any colors in the image that are out of gamut for the current CMYK setup specified in the Color Settings dialog box. You can also use it to display the out-of-gamut colors if you have selected an inkjet profile as the current proofing space. The default battleship gray at 100% works pretty well for most images…unless you have a photo of a battleship on a foggy day, in which case lime green or shocking magenta might be a better choice.

Units and Rulers


As its names implies, the fifth preference screen controls how Photoshop measures image and document information.
  • Units. I prefer to change the ruler units in the main Photoshop interface, either by (Control-clicking) [right-clicking] inside the rulers, or by accessing the units in the XY section of the Info palette (see figure 1.20). If you'll be printing most of your images, use the measurement system you are most familiar with. If you were raised in the United States, that's likely to be inches; if you're from almost anyplace else in the world, you might be more comfortable with centimeters. If you need to prepare images for the Web, pixels are the best choice.
    Figure 1.20. Changing units of measurement via the Info palette is faster than changing the preference setting.
  • Column Size. If you are doing any work on a publication that uses columns for arranging text on a page, such as a newspaper, specifying the exact size of your columns here lets you resize images or create new files, based on the column width used in your publication. If you want to resize a photo so that it is two columns wide, for instance, the column size preference tells Photoshop how wide to make your image.

Plug-Ins and Scratch Disks

Photoshop is a memory-intensive application, so this preference pane lets you assign separate hard drives to increase Photoshop's memory allocation.
  • Scratch Disks. When Photoshop runs out of RAM, which is the fastest memory in your computer, it uses empty hard drive space as temporary RAM. The preference options let you assign first, second, third, and fourth choices for which hard disks, called scratch disks, Photoshop should use as scratch space. You should always assign your fastest drive with the largest amount of free space as the primary scratch disk drive.

Tip
Adobe recommends you have at least five times the size of your image in available RAM, meaning the RAM remaining after your operating system, Photoshop, and any other application have taken what they need to operate. Of course, more RAM is always better.


Memory and Image Cache

The eighth preference pane is very important to set up correctly.
  • Cache Settings. The image cache enables Photoshop to increase the apparent speed with which it deals with large images. Using the number specified here, Photoshop saves several smaller versions of the image at different zoom percentages (that is, 25%, 33.3%, 50%, and 66.7%). When viewing the image in a zoomed-out view, the program can apply the changes to a smaller, cached version first and update your screen preview faster. The default setting is 4 cache levels, which works just fine for most images. If you find that you're working on really large images and you have a good allocation of RAM, you might try increasing it to 6.
  • Use Cache for Histogram in LevelsThis preference should be turned off! Its sole purpose is to speed the rendering of histograms in the Levels dialog box when you are working on your image at views other than 100%. Although the speedier histogram may seem like a good thing, you're not getting the real histogram from the full image. Rather, you're getting a histogram rendered from whatever cached version happens to be presently in use. If you're going to make the effort to understand what the histogram is telling you, you might as well be getting the accurate data.
  • Memory Usage. This section shows you how much available RAM you have and how much of it should be assigned to Photoshop. Both Windows and Mac OS X use dynamic memory allocation, so the number is not necessarily as specific as it may seem in this preference. I generally use 90 percent of available RAM for Photoshop. If you are running a lot of programs or you find your system getting cranky, you may need to lower this amount, install more RAM (always a good idea), or try closing some applications. Of these options, getting more RAM is the best one. You can never have too much RAM with Photoshop, especially now that you can work on 16-bit layered images.

File Browser

New to Photoshop CS, this group of preferences influences various aspects of File Browser behavior.
  • Do Not Process Files Larger Than… If you have certain folders that contain really large image files and you don't want the browser to get bogged down in generating high-res previews and thumbnails, you can specify a file size cap here. The default is 200MB.
  • Allow Background Processing. This preference tells Photoshop to grab on to any extra available processing power and use it to generate previews and thumbnails for the selected folder of images, even if you're not currently working in the File Browser or Photoshop. This is very useful for setting up the File Browser to work on a large folder of new images before you actually start browsing the files. I like to target the folder in question and then work on other tasks (or just go have dinner), so that when I return, all the thumbnails and high-quality previews are ready to use.
  • High-Quality Previews. As the name implies, this preference directs the File Browser to build a higher-resolution preview. This is an essential feature for evaluating images before you open them—I recommend you turn on this feature.
  • Render Vector Files. If you have Illustrator, FreeHand, or CorelDRAW files and want to see previews of them in the File Browser, turn this one on.
  • Keep Sidecar Files with Master Files. The sidecar files contain additional information about images generated by the File Browser. By default, this preference is turned on. It lets you move, copy, delete, rename, or batch rename the data, along with the associated image files. I suggest leaving this option on.
Related Content
SHOW

URL 
 

COLOR SETTINGS

COLOR SETTINGS

The Color Settings dialog box is mission control for how Photoshop handles the display and conversion of color in your images. Understanding what goes on here and choosing the appropriate settings is key to controlling color in Photoshop and maintaining the color fidelity of your photographs. Although the settings are executed in the background, this dialog box is one of the most important areas in the program: The settings you choose here affect how images are opened, what happens to pixels when you paste from one image into another, how colors are displayed on your monitor, and how much notice you get if a particular process may change the colors in an image. It's well worth your time to get to know the different options in this dialog box and understand how they impact your image-editing workflow.

How Photoshop Handles Color

Before I get into the details of the Color Settings dialog box, let's pause for a moment to get a good overview of the terrain I'll be exploring. It doesn't do any good to simply tell you what settings to choose, which checkboxes to check and what radio buttons to enable if you don't have an understanding of the conceptual foundations of the Color Settings dialog box and Photoshop color management in general.
When distilled to its most basic components, a digital image is nothing more than an electronic paint-by-numbers kit. The image is made up of a grid of pixels, with each pixel's color, or tone if it's a grayscale image, represented by a number. In the case of an RGB image, each pixel has three values, one each for red, green, and blue. True, when you're working on an image in Photoshop, it probably feels a lot more high-tech than a paint-by-numbers kit, but all you're really doing when you edit a digital image is changing the color of the pixels. The numbers that are assigned to the pixels tell Photoshop how to display each pixel on your monitor, or they tell an output device what color each pixel should be when the image is printed.
The problem with this arrangement is that it comes with a certain amount of ambiguity. A paint-by-numbers picture, divided into separate areas that call for specific colors, will look very different depending on whether you use watercolors, oils, acrylics, colored pencils, or chalk pastels. With digital color, the actual color you get, whether displayed on a monitor or printed by an inkjet or photographic printer, will vary from device to device, simply because different devices interpret the numbers and render color in different ways.
In an effort to standardize how digital color is displayed and printed, color management in Photoshop revolves around four key principles:
  1. Controlling your working environment with consistent lighting and neutral-colored walls.
  2. Having a properly calibrated monitor with an accurate profile that tells Photoshop how your specific monitor displays color.
  3. Using an RGB Working Space that is device-independent; that is, its interpretation of how a given set of color numbers should be displayed is not constrained by the limitations of a particular device, such as a monitor, printer, scanner, or camera.
  4. Adding ICC profiles, or color tags, to your image files that tell Photoshop and other ICC-aware applications how the color numbers in your file should be displayed. These color tags give meaning to the color numbers in your image.

The Importance of Monitor Calibration and Profiling

The importance of controlling your viewing environment and having an accurately calibrated and profiled monitor cannot be emphasized enough. Simply put, if your monitor has not been properly adjusted (calibrated) and the profile that describes it is not accurate, no amount of color management diligence and use of image color tags farther down the pipeline will give you predictable color. If you have never created a profile for your monitor (at the very least you should use the calibration utility that comes with your computer's operating system), I recommend postponing any serious printing of your images until that vital piece of the puzzle has been resolved.
Note
The Adobe Gamma monitor calibration utility is included with the Windows versions of Photoshop and Photoshop Elements, but not the Mac version. This is because Adobe Gamma does not run on Mac OS X. If you are not using a third-party calibration package to calibrate and profile your monitor, Adobe recommends using the ColorSync calibration utility that is included with OS X.

The Importance of Working Spaces

A working space defines how Photoshop will interpret the color numbers in a file and gives some visual meaning and consistency to the numbers that make up a digital image. The working space will affect any new images you create in Photoshop and images that do not already have a profile associated with them (as is often the case with files from a digital camera). Because the working spaces that are available in Photoshop do not represent color as defined by a particular device, such as a monitor or printer, as long as an accurate monitor profile is being used and an image is saved with a color profile (more on that shortly), then the display of the image will be consistent when viewed on other calibrated and color-managed systems.

The Importance of Color Profiles

If you gather five people in a room and ask all of them to close their eyes and think of the color purple, it's very doubtful that everyone would imagine the exact same color. Apart from obvious brightness differences such as light purple and dark purple, there are also subtleties of hue and saturation to consider. Is it a deep bluish purple, or a purple with traces of intense magenta? With no way to precisely define the color, the range of imagined purples would be all over the map. To accurately convey a more specific idea of what type of purple you are talking about, you would need to provide some additional information. In a digital image, an ICC profile is the additional information that ensures the colors in the image are being interpreted properly.
A color profile is essentially just a label that describes how the colors in an image should be displayed or printed. Along with a monitor profile and a device-independent working space, it represents the third crucial component in how Photoshop handles the colors in the images you work on. Any file you work on in Photoshop should be saved with an embedded color profile (this option can be found in the Save As dialog box). The presence of a profile tells Photoshop and other ICC-aware applications how the colors should look. I cannot stress enough the importance of having a profile associated with your image. In the words of color management experts Bruce Fraser and Andrew Rodney, without an embedded profile, your file is just so much RGB “mystery meat.” Photoshop has no idea how to display the colors, so it just displays them according to the working space, which may represent a correct interpretation, but then again may not.
URL 
 

CONFIGURING THE COLOR SETTINGS

CONFIGURING THE COLOR SETTINGS

With that history lesson and important background information out of the way, let's turn our attention to the actual Color Settings dialog box and discuss some of the choices there. On Mac OS X, this dialog box can be found under the Photoshop menu; on Windows, it's found in the Edit menu. Or you can simply press (Cmd + Shift + K) [Ctrl + Shift + K].

The Settings Menu

The settings pop-up menu is at the very top of the Color Settings dialog box and contains a collection of preset configurations tailored for different purposes. If you have never changed these settings, it's likely they are still set at the defaults, which, while not catastrophic, are certainly not the best settings for serious photographic work with Photoshop. In Photoshop 6 and 7, the default settings are configured to Web Graphics Default unless you customize them when you first open the program after installation or later on. In Photoshop CS, the default settings have been changed to North America General Purpose Defaults, which for all practical purposes are no different than the previous set of defaults. Again, while use of these default settings doesn't herald the end of the world in terms of color quality, they're not ideal.
To quickly get to most of the settings that I recommend for photography, you can choose U.S. Prepress Defaults from the Settings menu (figure 1.21).
Figure 1.21. View of the opened Settings menu from the Color Settings dialog box, with U.S. Prepress Defaults active.

RGB Working Spaces

Photoshop provides you with four choices for RGB Working Spaces and of these, only two are serious contenders for those who care about good color reproduction. Unfortunately, neither of them is included in the default settings. Let's take a look at them in greater detail. I'll list them in order of preference, rather than how they appear in the Working Space pop-up menu.
  • Adobe RGB (1998). This is my preferred working space and, with few exceptions, it's the one I recommend for digital photographers. If you chose U.S Prepress Defaults from the settings menu, Adobe RGB (1998) is already selected for you. This RGB working space has the largest color gamut of any of the four spaces provided by Photoshop. If you're producing images for reproduction on a printing press, the gamut of Adobe RGB includes nearly all of the colors that can be found in the most commonly used CMYK gamuts. The only potential drawback of using Adobe RGB for prepress work is that it extends pretty far out into the brightly saturated greens—colors which in most cases would be impossible to reproduce on press.
    For any printed output of your photographs on RGB devices, whether that be on inkjet printers or photographic printers such as a Lightjet 5000, Adobe RGB (1998) encompasses most of the color gamuts of those devices and is the best choice of the available RGB working spaces in Photoshop. But if you're preparing files for specific output devices, it's always a good idea to check with your output provider to see whether they have different recommendations. Many consumer digital photo printers, such as the Fuji Frontier, use sRGB as their target output profile.
  • ColorMatch RGB. This working space is based on the gamut of an actual device, the Radius Pressview monitor that was once ubiquitous in prepress shops. After Adobe RGB (1998), this is the other logical choice to use, particularly if you are preparing images for press reproduction. Although the gamut of ColorMatch is much smaller than Adobe RGB (1998), it does include most of the common CMYK gamuts. Because it does not include as many intense, saturated colors as Adobe RGB (1998), some people prefer this space for work that will end up on press because the saturation of some of the colors they see on their monitor will more closely resemble what the image will look like when it is finally converted into CMYK.
  • sRGB. This is Photoshop's default RGB working space, so if you have never changed it, or if you just accepted the defaults when you installed the program, it's probably still set to this. If I had to describe this working space in a few words, those words would be “the lowest common denominator.” In an effort to place some reference on what they felt most of the world was seeing on their monitors, Microsoft and Hewlett-Packard developed the sRGB space to represent the gamut of the “typical” monitor. Because most of the world is probably using cheap monitors that are not designed for imaging work, sRGB is nothing to write home about. If your work is destined for a printing press, sRGB is not advisable because it produces considerable clipping of colors (that is, it cannot reproduce them), especially in the cyan range.
    With prints made from desktop inkjet printers, which is arguably what many digital photo graphers are most concerned with, sRGB is similarly gamut-challenged. Because most cameras use a variation of sRGB as their internal space for creating photos from the data produced by the CCD, you might think it makes sense to simply use sRGB in Photoshop as well. While not catastrophic for casual use (that is, emailing photos, dropping them into a Microsoft Powerpoint presentation, Web graphics, or hobby-printing), it's not ideal for printed output. Suffice it to say, if you really care about color quality, you can do much better. I recommend Adobe RGB (1998) over sRGB any day.
  • Apple RGB. I'm not sure why Apple RGB is still offered in Photoshop. In computer terms, it's something from the fossil record (the polite way of referring to it would be to call it a “legacy” working space). In Photoshop 4 and earlier, the default color space (it didn't let you choose your own back then) was based on an Apple 13-inch monitor, hence the inclusion of Apple RGB in the list of choices here. Unless you're just nostalgic for the past (otherwise known as the “dark ages before color management”), there is no good reason for you to choose this as a working space.
  • Many people assume that the best working space to use is one that describes their monitor, camera, scanner, or printer they will use to print the final image. This is a false assumption. You should never, ever use a device profile as a working space in Photoshop. For one thing, a working space based on a specific device, especially a monitor, may not contain all the colors your output device can render. Another reason is that device profiles are rarely neutral (also known as gray-balanced), which means that equal amounts of red, green, and blue yield a neutral color. Photoshop makes this critical assumption in color correction and blend mode calculations. To play it safe, stick with one of the four working spaces that ship with Photoshop. My recommendation is Adobe RGB (1998).

CMYK Working Spaces

Before I get into the different factors that determine what CMYK working space you should choose, let's get one thing straight: You only need to be concerned with this setting if the images you're working on will be reproduced on a commercial printing press. Even though desktop inkjet printers use cyan, magenta, yellow, and black inks, they are considered to be RGB devices because they do such a great job of taking the RGB data you give them, converting the RGB information into the color of ink they use, and most importantly making nice prints. If you don't need to convert images to CMYK for prepress purposes, you don't need to trouble yourself with this setting, and you can safely skip ahead to the next section.
Although RGB working spaces are device- independent, CMYK is very output specific, and the settings are influenced by such things as the type of inks, the paper being used, and, in some cases, the characteristics of the individual printing press. So it's not as easy to give a one-size-fits-all recommendation for the best space to use. This is also not a CMYK book, so our coverage of this area is not indepth. I can, however, talk about the default settings and some of the presets that are included with Photoshop that represent a good start. Knowing a bit more about these will help point you in the right direction should you find yourself having to prepare images for reproduction on a press. I also believe in acknowledging the expertise of those whose experiences and advice I value—Real World Adobe Photoshop CS by David Blatner and Bruce Fraser is an excellent resource for anyone who needs to use Photoshop with CMYK.
If you're in the United States, using the default U.S. Web Coated (SWOP) version 2 is probably as safe a choice as any for a default setting. The term web here does not refer to the World Wide Web, but to a web press, which uses huge rolls of paper fed through the press at incredible speeds (think of those montage shots in old movies where you see the newspapers flying by on the printing press in the background and the momentous front page spins into view in the center of the screen). The term coated refers to the fact that paper has a very thin coating that is designed to produce sharper text and images with more saturated ink coverage. This book is printed on coated paper, for example, as are most magazines and high-quality publications. If the press uses individual sheets of paper, as opposed to the large rolls on web presses, you might choose U.S. Sheetfed Coated v2. If you were printing on uncoated paper, which is generally duller and less glossy, you would use one of the settings for uncoated paper stocks.
Because CMYK settings are so tied to how the job will be reproduced, any setting you choose should be thought of as no more than a general placeholder that will suffice for the most common printing situations. Depending on the work you do and the type of publications in which it appears, one of the supplied presets may be just fine, but you should always maintain good channels of communication with your publisher or printer and verify you are using the right setting. While I was working on this book, for instance, I used two specific CMYK setups supplied to me by the publisher: one for images and the other for screenshots.

Gray Working Spaces

Gray working spaces can be selected to reflect specific dot-gain characteristics or display gammas. Dot-gain percentages refer to the fact that when printed on a press, a dot of ink will increase in size, and therefore become darker, as it is imprinted and absorbed into the paper. The gamma settings are designed for images that will be viewed on a monitor but also work well for images that will be printed on an inkjet printer (more on that shortly).
If your primary output is to a printing press, choose a dot gain that matches the same figure in your CMYK setup. For instance, a common percentage for coated stock is 20, which is the default in Photoshop CS. As with CMYK, however, mileage and dot gain may vary depending on the particular inks and paper being used, so consult your printer to get as much information as possible.
If you're printing black and white images to a desktop inkjet printer, I recommend setting the Gray Working Space to Gray Gamma 2.2. This is true even if you're on a Mac, which still uses a default display gamma of 1.8. A gamma of 2.2 (here and in your monitor calibration) will produce smoother gradients than a gamma of 1.8. If you're on a Mac and will be opening earlier grayscale files created using a gray gamma of 1.8, you will be notified that the embedded profile does not match the current gray working space of 2.2. In that case, just choose Convert to Profile, and the tones in the photo will be converted with an eye toward preserving the appearance of the image.

Spot Working Spaces

This setting is very specific and refers only to specialized prepress situations where custom inks (that is, other than the standard process colors of CMYK) will be used. It does not apply to working on your digital photographs. Because you'll probably never use it, the default setting is fine. If you need to use it at all, check with your printer about the specific dot-gain characteristics of the ink, paper, and press that will be used to print the job.
Related Content
SHOWSHOW MORE
Related Content
SHOWSHOW MORE
URL 
 

COLOR MANAGEMENT POLICIES

COLOR MANAGEMENT POLICIES

This section of Photoshop's Color Settings tells the program how to behave when it encounters an image that either does not have a profile (untagged) or has an embedded profile that does not match the currently selected working space (mismatched). This is the place that controls those annoying warnings that appear when you open an image in Photoshop. Well, some people feel they're annoying, but once you understand what they're telling you, they're not so bad.
There are three separate pop-up menus for setting the policies for RGB, CMYK, and Gray working spaces (figure 1.22). All contain the same three choices: Preserve Embedded Profiles, Convert to Working RGB (or CMYK, or Gray), and Off. These choices are the same ones that appear in the warning dialog boxes when you open images, although the exact wording is a bit different What you select here just determines which radio button is selected by default when the warning dialog box pops up. Let's take a look at exactly what these choices mean. I'll discuss them in order of our preference, rather than how they appear in the menu.
  • Convert to Working RGB. When a file is opened that has a different color tag than your working space, this choice will convert the image from the embedded space into your currently selected RGB working space. This is your best choice if you're working in a closed loop system (that is, you're generating all of your images from your scanner or digital camera), you know where all of the files are coming from and that they have accurate profiles, and you're using a working space such as Adobe RGB (1998).
  • Preserve Embedded Profiles. When opening a file with a color tag that is different from your working space, any embedded profile (like sRGB, or ColorMatch) is not touched. The image opens into Photoshop, and you can work on it in its own color space without having to convert to your working space.
    Assuming that you have a properly calibrated and profiled monitor, the display of the image should be correct. This setting is useful if you get files from different sources and only want to make a conversion to your working space after you have had a chance to see the file.
  • Off. If you open a file that contains an embedded profile, Photoshop will throw away the profile and regard the image as untagged. The color numbers in the file will be interpreted according to the currently selected working space, even though that may not be a correct assumption. Because I believe profiles (if they are accurate) can help you take control of the color in your digital images, it's probably no surprise that I think this is a really bad idea. By stripping the profile from the image, you are flying blind as to the true meaning of the color numbers, and Photoshop can only display the file as if it matched your working space. There is no good reason to choose this setting.
Figure 1.22. The Color Management Policies control whether you see a color profile warning dialog box when you open a file.

Profile Mismatches and Missing Profiles

These three checkboxes control whether you see those pesky missing or mismatched profile notices when you open a file. If you can't stand them and never want to be bothered by them again (and I hear this sentiment a lot!), you can turn them off here. I recommend you leave at least two of them on, however, because it's always good to be in formed about what's happening with the color in a file. The most important ones are the Ask When Opening options that trigger a notice if you open a file that either has no profile or has a profile that does not match your working space. The last one, which you can safely turn off (it drives me crazy!), is the Ask When Pasting option. This triggers a notice when you paste from one image to another and the profiles of the two don't match. In nearly all cases, the answer to the question it poses is the default one, which is to convert the color numbers so that the image appearance is preserved.

How to Deal with Profile Warnings

One of the most common questions I get from students and new Photoshop users is what to do about the missing profile and profile mismatch warnings that seem to pop up every time you open a file, as shown in figure 1.23. If you don't know what they're telling you or what the right answer should be, encountering these can be very frustrating. To make matters more perplexing, they use language that is slightly different from that used in the Color Management Policies section. In an effort to clear up some of the confusion surrounding these warnings, here are some recommendations on which choices are appropriate when you run into them.
Figure 1.23. The Embedded Profile Mismatch dialog box.

Profile Mismatch situations are the easiest to deal with because Photoshop detects a profile associated with the image, which gives it the necessary information to convert the color numbers from the existing profile into your current RGB working space. Of the three choices presented to you, only the first two are really an option.
The Use the Embedded Profile option will honor the existing color tag and you will be able to edit the image in its native space, as though your working space had been temporarily changed to match the profile of the image. This choice is the same as the Preserve Embedded Profiles menu option in Color Management Policies.
The Convert Document's Colors to the Working Space option is probably the more logical choice for most digital camera owners (assuming that the profile is correct). The most likely scenario you will encounter is opening a digital capture where the camera has tagged it with an sRGB profile. Because it's far better to edit an image in the Adobe RGB (1998) space than in sRGB, converting to the working space makes a lot of sense. The conversion will preserve the image's appearance, so while actual color values in the image may change, it should look exactly as though you had opened it by choosing to preserve the embedded profile. This choice is the same as the Convert to Working RGB option in Color Management Policies.
The final choice, Discard the Embedded Profile (Don't Color Manage), should not be used. This is the same as the Off choice in the Color Management Policies. The profile is removed from the image and the colors in the file are interpreted according to the working space, which is essentially just Photoshop shrugging and saying, “I dunno, let's try this.” The only reason I can think of to ever use this option is when you're certain the embedded profile is wrong and you want to remove it so that you can assign a new one.
If you open an image that has no embedded profile, Photoshop has no reference to rely on. In the Missing Profile dialog box, it asks you how you want it to interpret the color numbers in the file. If you are only opening files from your digital camera, you can usually figure out the right choice with a little testing. For one thing, most consumer level digital cameras create files that look pretty good when opened as sRGB files. If your camera lets you shoot into the Adobe RGB (1998) space, you can always select that, or simply convert into the working space if you're using Adobe RGB (1998). The next few paragraphs detail what the three choices in the Missing Profile dialog box (see figure 1.24) mean.
Figure 1.24. The Missing Profile dialog box.

The Leave As Is (Don't Color Manage) option is similar to Off in the Profile Mismatch Warning dialog box, with the exception that because there is no profile to start with, nothing gets stripped from the image. Photoshop opens it, interpreting the colors according to how the working space thinks they should be displayed, whether that is correct or not.
The Assign Working RGB option essentially does the same as the previous choice, with the only difference being that it slaps the profile of the working space onto the image. Because no color numbers have changed and the image is being displayed based on the specification of the working space, the appearance of the image will be identical to how it would look if you had chosen Leave As Is. This choice is appropriate only if you know that the file matches your working space.
The Assign Profile option lets you choose a specific profile and then convert to the working space after the profile has been assigned. This is a good choice if you know, for example, that sRGB works well for your camera's images but they still open up as untagged. You can choose sRGB from the pop-up menu and then click the Convert to Working RGB checkbox. The momentary presence of the sRGB profile gives Photoshop enough information to make a correct conversion to the working space. The only thing missing from this choice is a preview so that you can see how a different profile is affecting the image. But, because the image isn't even open yet, there's no way to see a preview.
Tip
When opening the tutorial images from this book's Web site, please choose the Use the Embedded Profile option to maintain the color integrity of the images.

Color Companion by Tim Grey and Real World Adobe Photoshop CS by David Blatner and Bruce Fraser are both great references if you want to delve deeper into Photoshop's handling of color.
Related Content
SHOWSHOW MORE