I always wondered about the first independence war of India and it's antecedents.
this was called the sepoy mutiny by the british.
the spark which lit the fire was supposedly the rumor that the cartridges for the bullets were coated with pig and cow fat which were religiously forbidden for muslims and hindus respectively.
Not knowing why a metal cased cartridge/bullet is neede to be dipped in fat ( knowing only about modern weapon ) I always wondered .
recently I came across this from a wordpress personal webpage of a sinhala enthusiast who gave detailed descriptions of flintlock and match lock weapons which were the weapons used by the british army before the modern weapons and now it makes sense .
as the cartridges were just twisted paper containing gun powder and the lead ball . the fat was used to make them water proof .
and the drill included a step where the soldier had to tear the cartridge using his teeth to load the gun.
An English Civil War manual of the New Model Army showing a part of the steps required to load and fire an earlier musket. The need to complete this difficult and potentially dangerous process as quickly as possible led to the creation of the military drill.[19]
In the 18th century, as typified by the English Brown Bess musket, loading and firing was done in the following way:
• Upon the command “prime and load”, the soldier would make a quarter turn to the right at the same time bringing the musket to the priming position. The pan would be open following the discharge of the previous shot, meaning that the frizzen would be tilted forward. If the musket was not being reloaded after a previous shot, the soldiers would be ordered to “Open Pan”.
• Upon the command “Handle cartridge”, the soldier would draw a cartridge from the cartridge box worn on the soldier’s right hip or on a belt in front of the soldier’s belly. Cartridges consisted of a spherical lead ball wrapped in a paper cartridge which also held the gunpowder propellant. The end of the cartridge opposite from the ball would be sealed by a mere twist of the paper. The soldier then tore off the twisted end of the cartridge with the teeth and spat it out, and continued to hold the now open cartridge in his right hand.
• Upon the command “prime”, the soldier then pulled the hammer back to half-cock, and poured a small amount of powder from the cartridge into the priming pan. He then closed the frizzen so that the priming powder was trapped.
• Upon the command “about”, the butt of the musket was then lowered and moved to a position against the soldier’s left calf, and held so that the soldier could then access the muzzle of the musket barrel. The soldier then poured the rest of the powder from the cartridge down the muzzle. The cartridge was then reversed, and the end of the cartridge holding the musket ball was inserted into the muzzle, with the remaining paper shoved into the muzzle above the musket ball. This paper acted as wadding to stop the ball and powder from falling out if the muzzle was lowered.
• Upon the command “draw ramrods”, the soldier drew the ramrod from the musket. The ramrod was grasped and reversed when removed, and the large end was inserted about one inch into the muzzle.
• Upon the command “ram down cartridge”, the soldier then used the ramrod to firmly ram the wadding, bullet, and powder down to the breech of the barrel. The ramrod was then removed, reversed, and returned to half way in the musket by inserting it into the first and second ramrod pipes. The soldier’s hand then grasped the top of the ramrod.
• Upon the command “return rammers”, the soldier would quickly push the rammer the remaining amount to completely return it to its normal position. Once the ramrod was properly replaced, the soldier’s right arm would be held parallel to the ground at shoulder level, with the right fingertips touching the bayonet lug, and lightly pressing the musket to the soldier’s left shoulder. The soldier’s left hand still supported the musket.
(At no time did the soldier place the musket on the ground to load)
• Upon the command “Make Ready”. The musket was brought straight up, perpendicular to the ground, with the left hand on the swell of the musket stock, the lock turned toward the soldier’s face, and the soldier’s right hand pulled the lock to full cock, and grasped the wrist of the musket.
• Upon the command “present”, the butt of the musket was brought to the soldier’s right shoulder, while at the same time the soldier lowered the muzzle to firing position, parallel to the ground, and sighting (if the soldier had been trained to fire at “marks”) along the barrel at the enemy.
• Upon the command of “fire”, the soldier pulled the trigger, and the musket (hopefully) fired. A full second was allowed to pass, and the musket was then quickly lowered to the loading position, butt against the soldier’s right hip, muzzle held off center to the left at about a forty-five degree angle, and the soldier would look down at his open pan to determine if the prime had been ignited.
This process was drilled into troops until they could complete the procedure upon hearing a single command of “prime and load”. No additional verbal orders were given until the musket was loaded, and the option was either to give the soldiers the command “Make Ready”, or to hold the musket for movement with the command of “Shoulder your firelock”. The main advantage of the British Army was that the infantry soldier trained at this procedure almost every day. A properly trained group of regular infantry soldiers was able to load and fire four rounds per minute. A crack infantry company could load and fire five rounds in a minute."
this was called the sepoy mutiny by the british.
the spark which lit the fire was supposedly the rumor that the cartridges for the bullets were coated with pig and cow fat which were religiously forbidden for muslims and hindus respectively.
Not knowing why a metal cased cartridge/bullet is neede to be dipped in fat ( knowing only about modern weapon ) I always wondered .
recently I came across this from a wordpress personal webpage of a sinhala enthusiast who gave detailed descriptions of flintlock and match lock weapons which were the weapons used by the british army before the modern weapons and now it makes sense .
as the cartridges were just twisted paper containing gun powder and the lead ball . the fat was used to make them water proof .
and the drill included a step where the soldier had to tear the cartridge using his teeth to load the gun.
An English Civil War manual of the New Model Army showing a part of the steps required to load and fire an earlier musket. The need to complete this difficult and potentially dangerous process as quickly as possible led to the creation of the military drill.[19]
In the 18th century, as typified by the English Brown Bess musket, loading and firing was done in the following way:
• Upon the command “prime and load”, the soldier would make a quarter turn to the right at the same time bringing the musket to the priming position. The pan would be open following the discharge of the previous shot, meaning that the frizzen would be tilted forward. If the musket was not being reloaded after a previous shot, the soldiers would be ordered to “Open Pan”.
• Upon the command “Handle cartridge”, the soldier would draw a cartridge from the cartridge box worn on the soldier’s right hip or on a belt in front of the soldier’s belly. Cartridges consisted of a spherical lead ball wrapped in a paper cartridge which also held the gunpowder propellant. The end of the cartridge opposite from the ball would be sealed by a mere twist of the paper. The soldier then tore off the twisted end of the cartridge with the teeth and spat it out, and continued to hold the now open cartridge in his right hand.
• Upon the command “prime”, the soldier then pulled the hammer back to half-cock, and poured a small amount of powder from the cartridge into the priming pan. He then closed the frizzen so that the priming powder was trapped.
• Upon the command “about”, the butt of the musket was then lowered and moved to a position against the soldier’s left calf, and held so that the soldier could then access the muzzle of the musket barrel. The soldier then poured the rest of the powder from the cartridge down the muzzle. The cartridge was then reversed, and the end of the cartridge holding the musket ball was inserted into the muzzle, with the remaining paper shoved into the muzzle above the musket ball. This paper acted as wadding to stop the ball and powder from falling out if the muzzle was lowered.
• Upon the command “draw ramrods”, the soldier drew the ramrod from the musket. The ramrod was grasped and reversed when removed, and the large end was inserted about one inch into the muzzle.
• Upon the command “ram down cartridge”, the soldier then used the ramrod to firmly ram the wadding, bullet, and powder down to the breech of the barrel. The ramrod was then removed, reversed, and returned to half way in the musket by inserting it into the first and second ramrod pipes. The soldier’s hand then grasped the top of the ramrod.
• Upon the command “return rammers”, the soldier would quickly push the rammer the remaining amount to completely return it to its normal position. Once the ramrod was properly replaced, the soldier’s right arm would be held parallel to the ground at shoulder level, with the right fingertips touching the bayonet lug, and lightly pressing the musket to the soldier’s left shoulder. The soldier’s left hand still supported the musket.
(At no time did the soldier place the musket on the ground to load)
• Upon the command “Make Ready”. The musket was brought straight up, perpendicular to the ground, with the left hand on the swell of the musket stock, the lock turned toward the soldier’s face, and the soldier’s right hand pulled the lock to full cock, and grasped the wrist of the musket.
• Upon the command “present”, the butt of the musket was brought to the soldier’s right shoulder, while at the same time the soldier lowered the muzzle to firing position, parallel to the ground, and sighting (if the soldier had been trained to fire at “marks”) along the barrel at the enemy.
• Upon the command of “fire”, the soldier pulled the trigger, and the musket (hopefully) fired. A full second was allowed to pass, and the musket was then quickly lowered to the loading position, butt against the soldier’s right hip, muzzle held off center to the left at about a forty-five degree angle, and the soldier would look down at his open pan to determine if the prime had been ignited.
This process was drilled into troops until they could complete the procedure upon hearing a single command of “prime and load”. No additional verbal orders were given until the musket was loaded, and the option was either to give the soldiers the command “Make Ready”, or to hold the musket for movement with the command of “Shoulder your firelock”. The main advantage of the British Army was that the infantry soldier trained at this procedure almost every day. A properly trained group of regular infantry soldiers was able to load and fire four rounds per minute. A crack infantry company could load and fire five rounds in a minute."
No comments:
Post a Comment